Friday, July 31, 2020

CONCRETE SHRINKAGE AND ITS TYPES

Concrete Shrinkage

The volumetric changes of concrete structures due to the loss of moisture by evaporation is known as concrete shrinkage.Concrete shrinkage is the change in length per unit length and is, therefore  a dimensional number expressed as percent.It is a time dependent deformation which reduces the volume of concrete without the impact of external forces and is usually quantified in term of micro strain which is equal to 1x10^-6 in/in or 1x10^-6 m/m.



Types of Concrete Shrinkage

  1. Plastic Shrinkage
  2. Drying Shrinkage
  3. Carbonation Shrinkage
  4. Autogenous Shrinkage

1. Plastic Shrinkage

Plastic shrinkage occur very soon after pouring the concrete in the forms.The hydration of cement result in a reduction in the volume of concrete due to evaporation from the surface of concrete, which leads to cracking.


2. Drying Shrinkage

The shrinkage that appears after the setting and hardening of the concrete mixture due to loss of capillary water is know as drying shrinkage.Drying shrinkage generally occurs in the first few months and decreases with time.


3. Carbonation Shrinkage

Carbonation shrinkage occurs due to the reaction of carbon dioxide (CO2) with the hydrated cement minerals, carbonating Ca(oh)2 to CaCo3.The carbonation slowly penetrates the outer surface of the concrete.This type of shrinkage mainly occurs at medium humidity and results increased strength and reduced permeability.


4. Autogenous Shrinkage

Autogenous shrinkage occurs due to no moisture movement from concrete paste under constant temperature.It is a minor problem of concrete and can be ignored.


Factors Affecting Shrinkage


The shrinkage of concrete depends on several factors which are

1. Water-Cement Ratio

Shrinkage is mostly influenced by the water-cement ratio of concrete.It increases with the increases in the water-cement ratio.


2. Environmental Condition

It is one of the major factor that affect the total volume of shrinkage.Shrinkage is mostly occurred due to the drying condition of the atmosphere.It increases with the decrease in the humidity.

3. Time 

The rate of shrinkage rapidly decreases with time.It is found that 14-34% of the 20 years shrinkage occurs in two weeks, 40-80% shrinkage occurs in three months and the rest 66-85% shrinkage occurs in one year.

4. Types of Aggregate

Aggregate with moisture movement and low elastic modulus cause large shrinkage.The rate of shrinkage generally decreases with the increase of the size of aggregates.It is found that concrete made from sandstone shrinks twice than the concrete of limestone.

5. Admixtures

The shrinkage increases with the addition of accelerating admixtures due to the presence of calcium chloride (CaCl2) in it and it can be reduced by lime replacement.  

Other Factors

  • The method of curing.
  • The strength of concrete.
  • The dimension of elements
  • The type and quantity of cement.
  • Granular and microbiological composition of aggregate.

FIBER REINFORCED CONCRETE - TYPES, APPLICATIONS AND ADVANTAGES

Fiber Reinforced Concrete

Fiber reinforced concrete is a type of concrete containing fibrous materials which increases its structural integrity.It contains short discrete fibers that are uniformly distributed and randomly oriented.Fibers include steel fibers, glass fibers, synthetic fibers and natural fibers.Within these different types of fibers each of them lend varying properties to the concretes, fiber materials, geometries, distribution, orientation and densities.

Effect of Fibers in Concrete


Fibers are usually used in concrete to control cracking due to plastic shrinkage and drying shrinkage.They also reduce the permeability of concrete and thus reduce bleeding of water.Some types of fibers produce greater impact, abrasion and shatter resistance in concrete.Large steeel or synthetic fibers can replace rebar or steel completely in certain situations.Fiber reinforced concrete has all but completely replaced bar in underground construction industry such as tunnel segments where almost all tunnel lining are fiber reinforced in lieu of using rebar.Indeed, some fiber reduce the compressive strength of concrete.

The amount of fiber added to a concrete mix is measured as a percentage of the total volume of the composite (concrete and fibres) termed volume fraction (Vf). Vf typically ranges from 0.1 - 3%.Aspect ratio (l/d) is calculated by dividing fibre length (l) by its diameter (d).Fibers with a non-circular cross section use an equivalent diameter for the calculation of aspect ratio.

Types of Fiber Reinforced Concrete

  1. Steel Fiber Reinforced Concrete
  2. Glass Fiber Reinforced Concrete - GFRC 
  3. Polypropylene Fiber Reinforced Cement Mortar & Concrete
  4. Asbestos Fibers
  5. Carbon Fibers
  6. Organic Fibers

1. Steel Fiber Reinforced Concrete

Steel fiber reinforced concrete has gradually advanced in recent years, rather unproven material to one which has now attained acknowledgement in numerous engineering applications.Lately it has become more frequent to substitute steel reinforcement with steel fiber reinforced concrete.A numbers of steel fiber types are available as reinforcement.Round steel fiber the commonly used type are produced by cutting round wire into short length.The typical diameter lies in the range of 0.25 to 0.75 mm.Rectangular steel fiber are usually 0.25 mm thick, although 0.3 to 0.5 mm wire have been used.

Round steel fibers are produced by cutting or chopping the wire, flat sheet fibers having a typical c/s ranging from 0.15 to 0.41 mm in thickness and 0.25 to 0.90 mm in width are produced by silting flat sheets.Deformed fiber, which are loosely bounded with water-soluble glue in the form of a bundle are also available.


2. Glass Fiber Reinforced Concrete (GFRP)

Glass fiber reinforced concrete consists of high-strength, alkali-resistant glass fiber embedded in a concrete matrix.Glass fiber is made up from 200 to 400 individual filaments that are lightly bounded to make up a stand glass fiber is made and these stands can be combined to make cloth mat or tape or can be chopped into various lengths.It is not possible to mix more than about 2% by volume of fibers of a length of 25mm by using the conventional mixing techniques for normal concrete.

The major appliance of glass fiber has been in reinforcing the cement or mortar matrices used in the production of thin sheet products.The commonly used verities of glass fibers are e-glass used.In the reinforced of plastics & AR glass E-glass has inadequate resistance to alkalis present in Portland cement where AR-glass has improved alkali resistant characteristics.

3. Polypropylene Fiber Reinforced Cement Mortar and Concrete

Polypropylene is one of the cheapest & abundantly available polymers polypropylene fibers are resistant to most chemical & it would be cementitious matrix which would deteriorate first under aggressive chemical attack.Its melting point is high (about 165℃).So that a working temp.

Polypropylene fibers being hydrophobic can be easily mixed as they do not need lengthy contact during mixing and only need to be evenly distressed in the mix.Polypropylene short fibers in small volume fractions between 0.5-15 commercially used in concrete.


4. Asbestos Fibers

Asbestos fibers are naturally available inexpensive mineral fiber,has been successfully combined with Portland cement paste to form a widely used product called asbestos cement.Asbestos fibers are thermal-mechanical & chemical resistance and for sheet product pipes, tiles and corrugated roofing elements these are suitable.The fiber has low impact strength due to a relatively short length of about 10 mm. 


5. Carbon Fiber

Carbon fiber are about 5-10 micrometer in diameter and composed mostly of carbon atoms.Carbon fibers have several advantages including high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion.These properties have made carbon fiber very popular.Carbon fiber are expensive and strength and stiffness characteristics have been found to be superior to those of steel.But they are more vulnerable to damage then even glass fiber, and hence are generally treated with resign coating. 

6. Organic Fibers

Organic fiber such as polypropylene or natural fiber may be chemically more inert than steel or glass fibers.They are also cheaper, especially if natural.A large volume of vegetable fiber may be used to obtained a multiple cracking composite.The problem of mixing and uniform dispersion may be solved by adding a superplasticizer.


Application of Fiber Reinforced Concrete

  • Pre-cast application
  • Fiber shotcrete
  • Slope stabilization
  • Manholes, roof tiles, panels 
  • Dams and hydraulic structures
  • Highway and airfield payments
  • Impact resisting structures

Advantages of Fiber Reinforced Concrete

  • Increase ductility.
  • Decrease permeability.
  • Increase fire resistance.
  • Less prone to corrosion.
  • Decrease mix water bleed rate.
  • Improve toughness of concrete.
  • Greater resistance to crack formation.
  • Resistance to thermal and moisture stress.
  • Fiber increases the shear capacity of reinforced concrete beam upto 100%.

Disadvantages of Fiber Reinforced Concrete

  • Material cost is high.
  • Greater reduction of workability.
  • Lower compressive strength than steel.
  • Cost of forms and artisanry is relatively high.
  • Cracks can develop due to shrinkage and live loads.
  • Very low tensile power 1/10 of its compressive potency.

Thursday, July 30, 2020

WHAT IS POLYMER CONCRETE - TYPES, APPLICATIONS AND ADVANTAGES

Polymer Concrete

Polymer concrete is a type of concrete that uses polymer to replace lime-type cement as binder.It is a conventional concrete made with Ordinary Portland cement wet cured, and impregnated with a liquid/gaseous monomer (Methyl methacrylate) and polymerized by gamma radiation or chemically initiated means i.e. by using thermal catalytic method (adding 3% by weight Benzoyl peroxide) to the monomer as a catalyst.The impregnation is helped by drying the concrete at an extreme temperature by evacuations and absorbing the monomer under limited pressure.

Polymer concrete have been overseen by Committee 548 of the American Concrete Institute since 1971.It is not like traditional concrete , although it uses some of the same type of materials.It is also used for construction projects in the same manner, but the polymer compounds give the concrete several characteristics that tends to make it safer or more durable than regular concrete.


Types of Polymer Concrete

  1. Polymer Concrete (PC).
  2. Polymer Cement Concrete (PCC).
  3. Polymer Impregnated Concrete (PIC).


Properties of Polymer Concrete

  • It has good resistance against corrosion.
  • The binder is more expansive than cement.
  • Low permeability to water and aggressive solution.
  • It is lighter in weight compared to traditional concrete.
  • It has long term durability with respect to freeze and thaw cycles.
  • It has good adhesion to most surfaces, including to reinforcements.

Advantages of Polymer Concrete

  • It has high tensile strength.
  • It has high impact resistance.
  • It has high compressive strength.
  • It has more resistance to chemical attacks.

Applications of Polymer Concrete

  • Road.
  • Kerbstones.
  • Marine works.
  • Irrigation works.
  • Prestressed concrete.
  • Nuclear power plants.
  • Food processing buildings.
  • Prefabricated structural elements.
  • Sewage works and desalination plants.
  • Waterproofing of structures and numerous indistrial applications.

Wednesday, July 29, 2020

WHAT IS PRE-STRESSED CONCRETE - TYPES AND ADVANTAGES

Pre-stressed Concrete

Pre-stressed concrete is a combination of high strength concrete and steel strands.Prestressing is generally a way to overcome concrete weakness in tension.Generally the concrete undergoes compression on top flange and tension at bottom flange.In prestressing the tendons are stretched along the axis and cement is poured, later when the tendons and released the compression is generated at the botttom which tries to counter-balance the compression due to loading at the top part of the beam.The upward force along the length of the beam counteracts the service loads applied to the member.




Pre-stressed concrete was invented and patented in 1886 by Henry Jackson, an engineer from San Francisco USA.Pre-stressed concrete makes a strong structural materials that is used in the building of roof slabs, bridges girders and railroad ties.The walnut Lane Memorial Bridge built in 1951 in Philadelphia, Pennsylvania become the first structure in USA made of this type.

Pre-stressed concrete can be created using two different methods, they are as fallows:
  1. Pre-tension 
  2. Post-tension

1. Pretensioning 

The pretensioning method involves in stretching high tensile steel stands between abutments located at both ends of the concrete casting bed.After the stands are taught, concrete is poured into beds, where it surrounded and adheres to the stands.Once the concrete is dry it will have bonded to the steel.After the concrete has reached the desired strength the strands are released, resulting in the concrete developing a slight arch that makes it more resistant to heavy loads.


2. Post Tensioning

In post tensioning the steel is prestressed only after the beam is cast, cured and attain strength to take the prestress.Within the sheathing, the concrete is cast.For the passage of steel, ducts are formed in the concrete.

Once the casted concrete hardens completely, the tendons are tensioned.One end of the tendon is anchored and the other end is tensioned In same cases, the tensioning can be performed from either side and anchored subsequently.


Once the prestressing is complete, there is space between the tendons and the duct.This leads to:
  1. Bounded Construction
  2. Unbounded Construction

1. Bounded Construction

In bounded construction the space between the duct and the tendon is filled with cement grout.The grouting process helps the steel to resist corrosion to a large extent.The ultimate strength is increased as this method increases the resistance to live loads acting.The grout is a mixture of cement and water without admixtures.In this grout sand is not used.

2. Unbounded Construction

In unbounded construction no grout is used to fill the space between the duct and tendon.Here steel is galvanized to protect from corrosion.A waterproofing material is used for galvanizing.


Advantages of Pre-stressed Concrete


  • It has high compressive strength.
  • It is a best for construction of sleek and slender structures.
  • It is more durable than reinforced concrete.
  • The prestressing system works for a span greater than 35m.
  • Prestresseing helps to reduce the dead load of the concrete structure.
  • Prestressed concrete are free from cracks.
  • Prestressing enhance shear strength and fatigue resistance of concrete.

Disadvantages of Pre-stressed Concrete


  • It has higher material cost.
  • Prestressing is an additional cost.
  • High skilled labor is required.
  • Advanced technical knowledge and strict supervision is very important.

WHAT IS CONCRETE - TYPES AND ADVANTAGES

Concrete

Concrete is a composite material and is a mixture of cement, sand, aggregate, water and sometimes admixtures in required proportion.It is one of the most important and useful materials for construction work.When all the ingredients (cement, sand, aggregate,water) are mixed in the required proportions the cement and water start a reaction with each other to bind themselves into a hardens mass.The hardens rock like mass is known as concrete.


Properties of Concrete

  • It has high compressive strength.
  • It has low tensile strength.
  • It is more economical than steel.
  • It has low coefficient of low thermal expansion.
  • It is free from corrosion and there is a no appreciable effect of atmospheric agents on it.


Types of Concrete

  1. Waterproofing Cement Concrete
  2. Coloured  Concrete
  3. Lightweight  Concrete
  4. Pre-cast  Concrete
  5. Ready-mix  Concrete
  6. Transit-mix  Concrete
  7. No Fines  Concrete

1. Waterproofing Cement  Concrete

For certain types of works like water storage tanks, reservoir, basement wall, roofs swimming pool, sewage units etc, the impermeability of concrete is absolutely essential.Normally it can be started that if the concrete is made dense and free from cracks this is watertight.


2. Colored Concrete

Colored concrete is a type of concrete that has pigment mixed through, so that color is distributed entirely throughout.

Colored concrete can be made by following ways:

  • By adding of suitable coloring pigments to the extend of about 8-10% of the weight of the cement.
  • By using colored cement for the preparation of concrete.
  • By selecting aggregates possessing the required colored.

3. Lightweight Concrete

Light weight concrete mixture is made with a lightweight coarse aggregate and sometimes a portion or entire fine aggregate may be lightweight instead of normal aggregate.The light weight concrete having bulk density between 5-18 KN/m3.


4. Pre-cast Concrete
Precast concrete is refers to any type of concrete structure that is manufactured at a plant and transported to the construction site.In general, regular concrete structures are normally molded, poured and cured on-site.Precast concrete is used in a variety of construction projects ranging from home, landscaping. buildings, bridges etc.It is being used more in residential projects because it is more readily available than even before and provides quality and uniformity that may be lacking in on-site concrete work.


5. Ready-mix Concrete

Ready-mix concrete is a type of concrete that is manufactured in a factory or batching plant, according to set recipe, and then delivered to worksite by trucks mounted transit mixers.

6. Transit-mix Concrete

The concrete that is mixed either wet or dry en route to a job site is known as Transit-mix concrete.A transit-mix truck carries a mixer and a water tank from which the driver can, at the proper time, introduce the required amount of water into the mix.

7. No Fines Concrete

The no-fines concrete consists of cement, course aggregate and water.Thus the fine aggregate or sand is eliminated and such concrete has been adopted for cast-in-situ external load bearing wall of single and multi-storey houses, small retaining walls, damp-proofing sub-base materials etc.


Advantages of Concrete


  • The compressive strength of concrete is very high.
  • It is very strong in compression.
  • It can be cast easily into any desired shapes.
  • It can be pumped and sprayed in difficult positions.
  • It possesses a minimum corrosive and weathering effects.
  • It is economical than any other building materials.
  • It is fire resistant.

What is a Diaphragm Wall?

  What is a Diaphragm Wall?  A diaphragm wall acts as the backbone of deep excavations. It is a strong, reinforced concrete wall constructed...